ampacity.ai
Sign inStart free trial

Built by the trade, for the trade

Your electrical system — real, accurate, up to date.

Upload photos of your panel schedules. Circuits, breakers and loads become linked panels with NEC 2023 load calculations, not spreadsheets.

Start your 14-day free trialSee what works today

Features marked Coming soon are planned and not yet available.

Uploaded

Panel photo — coming soon

Imported

Panel schedule for LP-1, showing four slot pairs with breaker ratings, descriptions and per-phase loads. Slots 5, 7 and 8 are spare.
#BreakerABCBreaker#
1
Receptacles — east wall
1P · 1.44 kVA · 12.0 A · A · recep
20A
1.44
0.96
Lighting — bay 1
1P · 0.96 kVA · 8.0 A · A · ltg
20A
2
3
RTU-2
3P · 18.00 kVA · 50.0 A · ABC · hvac
50A
3P
6.00
2.40
6.00
2.40
6.00
Water heater
2P · 4.80 kVA · 23.1 A · AB · heat
30A
2P
4
51.20
Controls
1P · 1.20 kVA · 10.0 A · A · mtr
15A
6
78
A photographed schedule beside the panel it became.

What works today

Seven things, all live in the app now.

  • Now

    AI Import

    Upload a photo of a panel schedule. Circuits, breakers and loads come back as an editable schedule, with the source photo one click away.

  • Now

    Calculate

    NEC 2023 load calculations — headroom, utilization, phase balance — update with every saved change.

  • Now

    Check and assess

    Check the drawings you are building from, or assess the design you are drawing up. A panel change carries through to the panels feeding it.

  • Now

    Assemble in minutes

    Start from as-builts, or build from scratch. A panel photographed on site and a panel typed in behave the same afterwards.

  • Now

    Equipment register

    Panels, transformers, switchgear, generators, transfer switches, motors, equipment loads and the utility service in one list, with nameplate details where the plate carries them.

  • Now

    Label

    A QR code on every panel and asset opens a read-only sheet. Scanning needs no account.

Now

Print

PDF panel schedules, ready to hand over or tape inside a door.

Pick your side of the job

The same record, read four ways.

  • Contractors

    Check the design, build it, and leave the record behind.

    Test a change against real panel capacity before anyone pulls wire, and keep the record current as the job moves.

  • Designers

    Big-picture load numbers before the drawings are done.

    Demand and capacity in minutes, calculated the same way on every panel — and a change propagates and recalculates after each save.

  • Testing agencies

    The panel in front of you, on your phone.

    Scan any panel code today, with no account. More of your workflow is planned for Pro — see the ledger below.

  • Owners and maintenance

    A clean record of your building, not a binder.

    The current information about the panel you are standing in front of is one scan away — what it feeds and what it can still carry.

Scan the panel, read the current record

A printed code inside the door, and a phone in front of it.

Taped inside the panel door — scan it, no account needed.
The same record, current — not the faded 2009 print-out.

https://assets.ampacity.ai/p/demo

  • Now

    Label

    A QR code on every panel and asset opens a read-only sheet. Scanning needs no account.

One linked system, shareable and updateable years from now

No matter where the as-builts are collecting dust. A breaker change updates the schedule, the load calculation, and the panel feeding it at the same time.

  • Now

    Check and assess

    Check the drawings you are building from, or assess the design you are drawing up. A panel change carries through to the panels feeding it.

What works today — and what does not yet

Now — in the app today

  • AI ImportUpload a photo of a panel schedule. Circuits, breakers and loads come back as an editable schedule, with the source photo one click away.
  • CalculateNEC 2023 load calculations — headroom, utilization, phase balance — update with every saved change.
  • Check and assessCheck the drawings you are building from, or assess the design you are drawing up. A panel change carries through to the panels feeding it.
  • Assemble in minutesStart from as-builts, or build from scratch. A panel photographed on site and a panel typed in behave the same afterwards.
  • Equipment registerPanels, transformers, switchgear, generators, transfer switches, motors, equipment loads and the utility service in one list, with nameplate details where the plate carries them.
  • LabelA QR code on every panel and asset opens a read-only sheet. Scanning needs no account.
  • PrintPDF panel schedules, ready to hand over or tape inside a door.

Coming soon — planned, with the plan it lands in

  • BasicDirectory cards and QR label sheetsPrinted panel directory cards and sheets of QR labels, straight from the model.
  • BasicProject handoverHand the finished record to the owner at closeout.
  • ProOne-line diagramThe facility one-line, to view first and to draw later.
  • ProFeeder schedule and fault studyFeeder schedule, voltage drop, fault current and AIC adequacy.
  • ProTest recordsTest results attached to the equipment they came from, and a commissioning report per project.
  • ProConstruction progressTrack what is installed, what is terminated and what is energized.
  • ProLoad comparisonCompare existing, new and demolished loads side by side.
  • ProArc flash and coordinationIncident energy per IEEE 1584, and time-current coordination studies.

Features marked Coming soon are planned and not yet available.

Why ampacity.ai

  • Built by people who do the work

    Built by Steve Ashburner, P.E., with 20+ years in the trade.

  • Stop retyping

    Import the schedules you already have instead of keying them into a spreadsheet.

  • One linked system, not linked spreadsheets

    A breaker change updates the schedule, the load calculation, and the panel feeding it at once.

  • Honest about what has shipped

    Every capability on this page is labelled Now or Coming soon, and the ledger above says which is which.

Pricing

Basic is priced. Pro is listed without a price until its first feature ships.

  • Basic

    Available now

    Everything that works today, for the people doing the work.

    $69 / user / month

    or $690 / user / year

    Start your 14-day free trial
    • AI Import
    • Calculate
    • Check and assess
    • Assemble in minutes
    • Equipment register
    • Label
    • Print

  • Pro

    Coming soon

    The analysis and record-keeping tier. Nothing in it has shipped.

    Price not announced

    • One-line diagram
    • Feeder schedule and fault study
    • Test records
    • Construction progress
    • Load comparison
    • Arc flash and coordination

14-day free trial, no credit card

Start with one panel. The system builds from there.

Start your 14-day free trial

NEC 2023 · 14-day free trial, no credit card · sign in at app.ampacity.ai